The overall size of this wall hanging is 23 1/8" in diameter. There are two pieces of Baltic Birch plywood that were used and glued to braces on the back side. I had to use two pieces since my engraving area is only a maximum of 12" x 24". I raster engraved the wood & then vector cut the paper so that I could lay it into the wood.

The entire project took over 20 hrs to complete. The hardest part was getting everything to line up properly.

The engraving alone took 2 1/2 hrs per piece x 2 pieces = 5 hrs total! Never engraved something this long before.

I created the inlay in the middle using watercolor on Strathmore watercolor paper.

 

This is for sale, if interested please contact me.

For more info, please visit Classic Engraving.