Learning How To Make a Cut Out Photo and Remove Background in Photoshop is a Great Way to Make Product Look Lifelike. With A Few Simple Ways, You Can Put Your Product Cutout Photo and Remove a Background in Photoshop.

You Need To Know About Those In Photoshop

Now, Let’s get started

1. What is the pen tool?

Though The pen tool allows you to draw two points. Point A and point B. Let us turn this on. Point A and point B and allows you to draw A line between those points and that’s pretty much. It and this line can be straight, this line can also be a curve.

That’s all there is now. This is the fundamental of a pen – now you can extend it to create complex shapes parts so on and so forth. What are spots and shapes?

we’ll get to that later but, We need to remember one thing anything you do with a pen – is a Waechter. okay, It’s not a raster it’s a weck term.

2. What’s the difference between vector and raster?

The difference between a waxer is based on mathematical formulas. A raster is based on pixels. right, The picture that You take with a camera is a raster.

Because, It’s made up of tiny pixels When you bought the camera they might have said, You the camera is 24 megapixels or,50 megapixels. This means the picture that, You take with it consists of 50 million pixels.

3. What are pixels?

Small squares with color information, they combine together to give you the image wet down.

4. What is Vector?

The other hand is any graphic, which is based on mathematical formulas and not on pixels, for example, A simple mathematical formula like Y equals X determines a straight diagonal line 45 degrees. Right, No matter how much you zoom it? here’s the special thing about.

No matter, how much you zoom in? It will never pixelated. why? Because it’s not made up of pixels.

*Open The Photoshop to Clipping Path Photo and Remove Background

Let us illustrate in Photoshop if you draw any shape. You choose custom shape and choose any shape that you like and You choose a color maybe red. That’s fine. You are gonna choose a shape. now, If you draw it. This is fine.

This is a fine red colored Spade or Whatever that is now since This is a vector. You can make it, as big as you want. Let’s make it. This big and It’s still razor-sharp. It’s still very sharp. If you make it smaller just like this controller come on T and let’s make it smaller and hit enter okay.

Again You make it bigger, It’s still sharp. You can do this, “ Again and Again ” and it always stays razor-sharp but this doesn’t happen with raster images.

Because they are made up of pixels and once. You make them smaller, they burn themselves down into those pixels and once. You make it bigger, It kind of messes up remember this canvas.

It’s made up of pixels so If You zoom in. “okay” If you zoom in, It’s going to pixel it because this canvas is made up of pixels. Remember but, this object the shape is a vector.

**Create a new layer for cutout photo and remove background In Photoshop.

The same shape and This time select pixels. Now, it will be created off pixels. You make it. Then if you make it bigger. It might not pixelate in a first glance right. You’ve made it bigger.“okay” It’s still sharp not bad. Once you make it smaller just like this hit Enter and then again when you make it bigger.

At this, it has lost all the details. It’s totally crazy right now. It’s crazy all you need to know is that anything you do with the pen tool is a vector simple.

5. How do you use the pen tool to cut out Photos?

Pretty simple use the letter B. Don’t forget it B’s the shortcut for the pen to press the letter P second thing select. What do you want to do?

You want to make a part or you want to make a shape. what are those? We’ll get to that later first.

6. What is Clipping Path?

A Clipping path is a line a wet to line with no thickness.” okay” if you make a pot like this and if you save the image it won’t show up. You can add thickness to it. You can make convert it into shape.

A selection or do a lot of things with it add stroke but a simple part. The just path is a vector line with no thickness.

7. How to make a straight path?

It’s a very simple dot click. One-click, twice click, thrice four, five six, seven and once, You reach the starting point it shows you circle which means the circuit is complete. Right, just click here and the shape will be complete.

Then You can do anything with you can make it. A selection makes a selection or does anything with it. So, we’ll get to that later.

8. What if you want to make a curved path?

One of the greatest things about using the pen tool. while you’re making a selection is that You can go back by point by point. That’s amazing. Okay to make a curve it’s simple. You open up point A and point B.So, That it becomes easy for you On point A. You have A point on point B instead of just clicking. there You will click and drag it becomes a curve.

Once you click and drag look at this. what is this? This is a handle. A handle influences the curve. Then You do that again for you. If you click and drag this is the handle. Now, if you move the handle. This way if you rotate the handle. this will determine the degree of the curve.

9. What is the degree?

The degree is simply the angle 60 degree, 90 degrees, zero degrees. If you make the handle longer this will control the intensity of that degree.

This is the degree that you want if you make the handle longer. it will increase the intensity of its right degree this is. You are changing the degree, you are changing the intensity of that particular degree.

If you look at the handle. It has two parts. This part and this part, this part influences, This curve. What does this part do? This part will influence the upcoming curve.

***What do you mean by the upcoming curve?

If you make a point here, See how this curve is influencing. You can anytime edit it by holding ctrl or command. If you are using a Mac hold the controller command and you can edit.

It like hell, “right” You can edit this handle. You can edit this point, You can do anything you like. You can make it shorter longer. You understand one more thing.

Now, Instead of starting out with a point. You could have started out with the handle straight away. Come back and instead of starting out with the point. If you at the moment in the beginning, just click and drag. This creates a handle that creates a handle. The next time you make a point the curve will be influenced by that click and drag. What’s happening a curve is?

Influenced by two handles. “right” You can edit it anytime. You like by holding the key control or command hold the key controller command. It takes you to the direct selection tool and you can edit.

It real-time and once you’re satisfied, You can continue okay or You could have continued by clicking and dragging. Then You can finish that.

****How to Remove Photos Background in Photoshop

When you create paths, try to create a few points as possible. When you click on the starting point, You will close the path. You can then click within the path and drag to create a curve, and you can move it around.

*****Using the direct selection tool to Remove image background

Using The direct selection tools Click on a point, and drag it to match the edge of the object. When you have matched the edges of your object, what you need to do is click on the layer and hold Ctrl on Windows, That’s Command on the Mac, and click on the layer mask icon to create a Vector Mask.

This is a mask based on a vector. By the way, if when you create your mask, you get the opposite effect, make sure that You come into the options bar and change the option on this drop-down to “combine shapes.”

That way, You remove the background instead of removing the object that you’ve selected. Remember, You still need to make a hole on the handle, and You’ll use the pen tool for that.

Once again, just click on the corners. When you click, you could also drag to get a curve. So You should just get a slight curve here. Click here, and drag just to follow the edges of the shoes.

So You can do that, as well. Remember, you can use the direct selection tool to edit the path. With the tool selected, you can hold Alt, Option on the Mac, and click-and-drag on this handle to move.

It independently from the second handle. That way, It can match the edge better. You can also click on a point and use the arrow keys on the keyboard to nudge those points around, and you can fine-tune their position.

You could also press Ctrl H, Command H on the Mac, to hide the extras, which include the paths. That way, You could look at your Vector Mask without the blue lines distracting you.

To bring back the path, You can press Ctrl H once again. With this center path selected, You can now go into the drop-down and select Subtract From Shape and that completes the mask.
It’s very smooth edges.

******Create a solid-color fill layer in Photoshop

You go to select the light gray and press OK and drag the color-fill layer below the image. You will see how smooth the edges are?, and You can fine-tune the vectors just a little more to remove some of these edges.

So, Let You select the vector. Click-and-drag on the point. And just use the arrow keys on the keyboard to fine-tune those, and You have better edges.

If You zoom in, You’ll see that the edges are very smooth. You can also click on the Vector Mask, and in the Properties panel, use the feather slider to blur the edges if you need it.

You don’t want to do that in this case. You want to have sharp edges. You can also reduce the density of the mask, which is basically the opacity of the mask.