Lamp with muslin
The lamp is first stitched from outside and it is dragged from the hole lift before as shown in the above picture. The left unstitched hole is used to fit the lamp inside of the cylinder and finally the left gap is stitched by the hand stitching.
Pin tucks:
Fusing :
The fusing material is used to give strength to the fabric, to strengthen the fabric or to give a perfect shape to the Maslin fusing is used. If you're using a paper-backed fusible, the rough side is the side with the glue. Lay the rough side onto the back of your fabric.
Tucks with wire:
First I made pintucks in the exact middle of the cylinder after that I introduced wire into the fabric pipe like structure to create a perfect circle like shape in the middle of the cylinder.
